LL01SE A4 Sheet Fed Computer Laser Labels

White paper with permanent adhesive - A white uncoated paper with a smooth finish, giving good print results using ink-jet & toner systems (Mono & Colour). The material is designed for use on most laser printers & copiers especially mid to high-speed machines.

Face material properties
Grammage 70 gsm
Caliper (thickness) 90 microns
Tensile strength kN/m 5.2 MD - 2.2 CD
Roughness PPS 10 5.0
Opacity 2%
Stiffness (Kodak) -

Adhesive - A permanent, acrylic based adhesive with good tack & adhesion on a wide range of surfaces. This adhesive also complies with the German BgVV for indirect food contact & short term contact with dry & moist food.
Minimum application temp. +5 C
Storage range once applied -20 C to +80 C

Backing - A bleached kraft paper with good lay-flatness & stability
Thickness 55 microns, Grammage 55 gsm, Tensile strength kN/m 4.8 MD - 1.8 CD

Environmental - Paper components are either ECF or TCF grade manufactured using pulp from sustainable, managed resources. All dimensions are nominal target specifications, but may vary. All products within our range are manufactured under ISO9001:2008